lan-mate series description : 10/100 base-t rj45 1 x 1 integrated magnetics connector p/n: klu1s041-43 lf bothhand usa page : 1/2 a1(12/05) feature l rj-45 needs to be matched fcc standard. l complies with requirement of ieee802.3u standards. l rj-45 connector integrated with transformer/impedance resistor/high voltage capacitor. l size same as rj-45 connector to save pcb board space. l reduced emi radiation to improve emi performance. l design for 10/100 base transmission over utp-5 cable. l includes integrated 2 leds(option).led signal leads are isolated from the ethernet signal leads to reduce emi and cross talk. l compliance with rohs requirements. l operating temperature range: 0 to +70 . l storage temperature range: -25 to +85 . l recommended panel part number standard led forward*v(max) (typ) 3 yellow 2.6v 2.1v 4 green 2.6v 2.2v *with a forward current 20ma electrical specifications @ 25c insertion loss (db max) part number turns ratio (5%) tx/rx ocl (uh min) @ 100 khz/0.1v with 8ma dc bias c w/w (pf max) l.l (uh max) 0.3-100mhz hi-pot (vrms) klu1s041-43 lf 1ct:1ct 350 28 0.4 -1.15 1500 continue return loss (db min) cross talk (db min) cmr (db min) part number 30mhz 40mhz 50mhz 60mhz 80mhz 0.3-30mhz 30-60mhz 60-100mhz 1-30mhz 30-60mhz 60-125mhz klu1s041-43 lf -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 schematic www.bothhandusa.com sales@bothhandusa.com
lan-mate series description : 10/100 base-t rj45 1 x 1 integrated magnetics connector p/n: klu1s041-43 lf bothhand usa page : 2/2 a1(12/05) mechanical 1. plastic material : thermoplastic (ul 94v-0), black housing 2. metal shield : brass, 20u " inches thick nickel 3. spring wire : 0.45mm dia. phosphor bronze with 0.1524 *10 -6 m gold plated & 1.524* 10 -6 m thick nickel 4. solder pin : 0.5x0.35mm, sus430 with solder plated 5. durability : 750 mating cycles min. pcb layout mounting hole(top view) www.bothhandusa.com sales@bothhandusa.com
|
